TIPS & TRICKS WITH SMS FUN

All latest Motherboards today, 486/ Pentium / Pentium Pro etc.,ensure that upgrades are easily obtained by incorporating the system BIOS in a FLASH Memory component. With FLASH BIOS, there is no need to replace an EPROM component. Once downloaded, the upgrade utility fits on a floppy disc allowing the user to save, verify and update the system BIOS. A hard drive or a network drive can also be used to run the newer upgrade utilities. However, memory managers can not be installed while upgrading. Most pre-Pentium motherboards do not have a Flash BIOS. The following instructions therefore do not apply to these boards. If your motherboard does not have a Flash BIOS (EEPROM) you will need to use an EPROM programmer to re-program the BIOS chip. See your dealer for more information about this. Please read the following instructions in full before starting a Flash BIOS upgrade: A. Create a Bootable Floppy (in DOS) •With a non-formatted disk, type the following: format a:/s •If using...

Yeah! you must have read in heard or read that the clock of your CPU can be changed. For example My Pentium-IV Processor runs at 1.8 Ghz default but I run it at a 2.6 Ghz whenever I need & sometimes to a wooping 3.5 Ghz. To change the clock speed first you need to open your BIOS which can be accesed by pressing "Delete" key in your keyboard immediately after pressing the power button. Note:- Some times system administraters just add a password to BIOS. If it asks for password you need to hack it by opening your cabinet & look for a cell battery on your motherboard just remove it & start your pc again. Note:- Ifyou have Orignal Intel Motherboard that is it displays Intel Inside Logo when booting up then this hack is not for you Intel already disables it. OK! all done just access the BIOS & look for a option called "CPU Clock". Now all you need is to increase the number slowly & save settings & start pc it the system is stable ...